networking - Exitcode0

Fortigate: Add a VLAN to a hardware switch

In this post, we are going to discuss how to add a VLAN to a hardware (sometimes referred to as physical) switch or interface on a Fortigate. It is worth noting that I actually do my testing on a FortiWifi, so I can assure you that this also applies there

fortigate

How to enable subnet overlapping on a Fortigate

A short and sweet problem/resolution. If you are looking to enable subnet overlapping on a Fortigate so that you can give multiple interfaces an IP in the same subnet, this is the post for you. NOTE: This feature can only be enabled in the Fortigate’s CLI. To

doubel NAT

Double NAT port forwarding with a Fortigate

If you are unfortunate enough to have to deal with double NAT on your gateway then you might know the troubles surrounding portforwarding or VIPs. Here is a quick how to guide for setting up a port forward on a Forgate where double NAT is inplace. Case Study – Plex

adblocker

Creating a local DNS server with Pi Hole

This is a local DNS server for local DNS requests. This post is going to explain the why and how I created a local DNS server in my home network environment. I used the PiHole project to make a network wide advert blocking a reality. https://pi-hole.net/ I have

Mistery

Podcast Recomendations for 2019

If you are a fan of listening to podcasts like myself then let me extend some of my favorite and most recommended podcasts: No Agenda If you have ever browsed your podcast listeners store, then I would hope that you have seen the No Agenda show. This podcast requires an